Antari Z3000 MK2 Smoke Machine
Make Your Event Dynamic with the stability, durability, and reliability of the Z-3000II Smoke Machine
When it comes to ultimate performance and precision control, the Z-3000II will suit virtually any application as a result of the rigorous research and development that has gone into this machine!
This fogger provides significant advantages in a wide array of applications where the volume of fog output is critical. Around 25% electricity consumption is saved due to the high efficient power control system allowing the fogger to operate at low-level temperature. An electronic low fluid detector is also installed which automatically stops the pump when running low on fluid. It is fully controllable via Z-20 LCD control module supplied allowing the operator to set the volume control and timing precisely to the exact percentage from 1% to 100% output. The unit also features both 3 and 5 pin IN and OUT XLR connectors for DMX control from a remote location.
Ideal for very large venues, outdoor events, movie productions or fire training drills.
- Power : AC230V/AC240V,50Hz-60Hz
- Heater : 3,000 W
- Output : 40,000 cu.ft / min
- First Heat-up Time : 12 min
- Tank Capacity : 6 liters
- Fluid Consumption Rate : 5 min / liter (100% Output)
- Weight : 19.9 Kg
- Dimensions (mm) : L 735 W 310 H 192
- Liquid Used: Antari FLR / FLG [YES! - BSS sells smoke fluid]
- Remote Included : Z-20 (LCD Timer Remote)
- Z-30 (LCD Wireless Remote)
The Z-3000II will accept any of the following smoke fluids that BSS sells...
- Stage Formula
- Full Sented Range of Smoke Fluid
- JEM Smoke Fluid
Smoke fluid is a liquid required for these machines to work. An average house party on a single night will consume around 1-2L of fluid keeping a small to medium sized room with a light mist of smoke.
BSS does not recommend that the fluid be substituted with, or replaced with any other fluid as this can cause blockages, present unintended operations/malfunctions/damage to the machine or pose health risks to the people around the smoke.
Smoke fluid will last up to 2-3 years in a well-sealed container away from any heat sources and direct sun light. BSS does recommend that the fluid be used as soon as possible after purchase for the best results.
The fluid in smoke machines is not designed to be left in the machine for extended periods of time (more than 4 weeks) without being used. It can lead to blockages inside the heating element and can also become contaminated with other semi-solid particles that can block the small components of the machine.
BSS recommends running the machine at least once a month for 3-4 minutes of continuous fogging or cleaning the machine with a cleaning solution.
The cleaning solution can be made from 4 parts/800ml Distilled water to 1 part/200ml white vinegar. Do not use any other fluid including dishwashing fluid.
Running around 1L of cleaning solution through the machine will help to break down any accumulated solids and ensure that it is clean and ready for use next time you get it out.
BSS recommends performing the cleaning operation outside and away from open doors and windows to a house as the vinegar may be an undesirable scent.
RRP AU$1245.00 AUD$900.00